Note 6 – Commitments and Contingencies

Accrued Warranty and Indemnification

The following table presents changes in the Company’s accrued warranties and related costs for the three- and nine-month periods ended June 30, 2012 and June 25, 2011 (in millions):

The Company generally does not indemnify end-users of its operating system and application software against legal claims that the software infringes third-party intellectual property rights. Other agreements entered into by the Company sometimes include indemnification provisions under which the Company could be subject to costs and/or damages in the event of an infringement claim against the Company or an indemnified third-party. However, the Company has not been required to make any significant payments resulting from such an infringement claim asserted against it or an indemnified third-party and, in the opinion of management, does not have a potential liability related to unresolved infringement claims subject to indemnification that would materially adversely affect its financial condition or operating results. Therefore, the Company did not record a liability for infringement costs as of either June 30, 2012 or September 24, 2011.

The Company has entered into indemnification agreements with its directors and executive officers. Under these agreements, the Company has agreed to indemnify such individuals to the fullest extent permitted by law against liabilities that arise by reason of their status as directors or officers and to advance expenses incurred by such individuals in connection with related legal proceedings. It is not possible to determine the maximum potential amount of payments the Company could be required to make under these agreements due to the limited history of prior indemnification claims and the unique facts and circumstances involved in each claim. However, the Company maintains directors and officers liability insurance coverage to reduce its exposure to such obligations, and payments made under these agreements historically have not been material.

Concentrations in the Available Sources of Supply of Materials and Product

Although most components essential to the Company’s business are generally available from multiple sources, a number of components are currently obtained from single or limited sources, which subjects the Company to significant supply and pricing risks. Many components that are available from multiple sources are at times subject to industry-wide shortages and significant commodity pricing fluctuations. In addition, the Company has entered into various agreements for the supply of components; however, there can be no guarantee that the Company will be able to extend or renew these agreements on similar terms, or at all. Therefore, the Company remains subject to significant risks of supply shortages and price increases that can materially adversely affect its financial condition and operating results.

The Company and other participants in the mobile communication and media device and personal computer industries also compete for various components with other industries that have experienced increased demand for their products. The Company also uses some custom components that are not common to the rest of these industries, and new products introduced by the Company often utilize custom components available from only one source. When a component or product uses new technologies, initial capacity constraints may exist until the suppliers’ yields have matured or manufacturing capacity has increased. If the Company’s supply of components for a new or existing product were delayed or constrained, or if an outsourcing partner delayed shipments of completed products to the Company, the Company’s financial condition and operating results could be materially adversely affected. The Company’s business and financial performance could also be materially adversely affected depending on the time required to obtain sufficient quantities from the original source, or to identify and obtain sufficient quantities from an alternative source. Continued availability of these components at acceptable prices, or at all, may be affected if those suppliers concentrated on the production of common components instead of components customized to meet the Company’s requirements.

Substantially all of the Company’s hardware products are manufactured by outsourcing partners that are primarily located in Asia. A significant concentration of this manufacturing is currently performed by a small number of outsourcing partners, often in single locations. Certain of these outsourcing partners are the sole-sourced suppliers of components and manufacturers for many of the Company’s products. Although the Company works closely with its outsourcing partners on manufacturing schedules, the Company’s operating results could be adversely affected if its outsourcing partners were unable to meet their production commitments. The Company’s purchase commitments typically cover its requirements for periods up to 150 days.

Long-Term Supply Agreements

The Company has entered into long-term agreements to secure the supply of certain inventory components. Under certain of these agreements, which expire between 2012 and 2022, the Company has made prepayments for the future purchase of inventory components and has agreed to acquire capital equipment to use in the manufacturing of such components.

As of June 30, 2012, the Company had a total of $4.4 billion of inventory component prepayments outstanding, of which $1.3 billion is classified as other current assets and $3.1 billion is classified as other assets in the Condensed Consolidated Balance Sheets. The Company had a total of $2.3 billion of inventory component prepayments outstanding as of September 24, 2011. The Company’s outstanding prepayments will be applied to certain inventory component purchases made during the term of each respective agreement. During the three- and nine-month periods ended June 30, 2012, the Company utilized $41 million and $634 million of inventory component prepayments, respectively.

Additionally, as of June 30, 2012, the Company had outstanding off-balance sheet commitments under certain long-term supply agreements to make inventory component prepayments and to acquire capital equipment to use in the manufacturing of such components of $302 million.

Other Off-Balance Sheet Commitments

The Company leases various equipment and facilities, including retail space, under noncancelable operating lease arrangements. The Company does not currently utilize any other off-balance sheet financing arrangements. The major facility leases are typically for terms not exceeding 10 years and generally provide renewal options for terms not exceeding five additional years. Leases for retail space are for terms ranging from five to 20 years, the majority of which are for 10 years, and often contain multi-year renewal options. As of June 30, 2012, the Company’s total future minimum lease payments under noncancelable operating leases were $4.1 billion, of which $3.0 billion related to leases for retail space.

The Company utilizes several outsourcing partners to manufacture sub-assemblies for the Company’s products and to perform final assembly and testing of finished products. These outsourcing partners acquire components and build product based on demand information supplied by the Company, which typically covers periods up to 150 days. The Company also obtains individual components for its products from a wide variety of individual suppliers. Consistent with industry practice, the Company acquires components through a combination of purchase orders, supplier contracts, and open orders based on projected demand information. As of June 30, 2012, the Company had outstanding off-balance sheet third-party manufacturing commitments and component purchase commitments of $13.6 billion.

In addition to the off-balance sheet commitments mentioned above, the Company had outstanding obligations of $4.5 billion as of June 30, 2012, which were comprised mainly of commitments to acquire capital assets, including product tooling and manufacturing process equipment, and commitments related to advertising, research and development, Internet and telecommunications services and other obligations.

Contingencies

The Company is subject to various legal proceedings and claims that have arisen in the ordinary course of business and have not been fully adjudicated, certain of which are discussed in Part II, Item 1 of this Form 10-Q under the heading “Legal Proceedings” and in Part II, Item 1A of this Form 10-Q under the heading “Risk Factors.” In the opinion of management, there was not at least a reasonable possibility the Company may have incurred a material loss, or a material loss in excess of a recorded accrual, with respect to loss contingencies. However, the outcome of litigation is inherently uncertain. Therefore, although management considers the likelihood of such an outcome to be remote, if one or more of these legal matters were resolved against the Company in a reporting period for amounts in excess of management’s expectations, the Company’s consolidated financial statements for that reporting period could be materially adversely affected.